More performance for higher demands
KD7030
High performance tablet deduster for largest dedusting capacities equipped with latest technology. Tablets are dedusted and conveyed with our unique acceleration control and helix in the most sensitive way.
- Upward conveying range of 400 to 1600 mm
- Highest conveying capacities
- Dust-tight window
- Quiet operation < 68 dB acoustic measurements
- Featuring an acceleration sensor that assures constant vibration, independent of the load / amount of tablets in the deduster
- Optimum viewing of tablet movement with pivoting and fully removable window
- Easy height adjustment, full 360° freedom of rotation at tablet inlet
- Vibration-free housing, patented drive unit
- Compact design, minimum footprint
- Easy assembly and disassembly, no tools are needed
- Easy to clean
- Classification: Atex Zone II 2D/- Db 140 °C
- Certification: OEB4 (1 μg/m³ to < 10 μg/m³) acc. SMEPAC
- Optional, HEPA filter M-class
Conveying heights
400-1600 mm
Conveying Capacity
up to 6,3Mio tph
Tablet inlet Options
The optional tablet inlet adapter connection to the tablet press and upstream equipment with the use of a rectangular tablet inlet 110×70 mm. If the adapter is not being used, a hose can directly be attached to the Tri-Clamp inlet. The inlet can be rotated 360° independent of the outlet. With the use of optional inlet adapters, the deduster is easily adjustable to various tablet press discharge configurations.
WINDOW FOR EASY VIEWING
The KD7010 and KD7030 dedusters feature a PETG dust tight, hinged, lift off window for easy viewing. The window is gasketed for dust tightness to meet OEB3 and OEB 4 hazardous dust requirements. The window allows easy access to interior of the machine for cleaning disassembly without removing the housing.
EASY TO USE CONTROL PANEL
The KD7010 and KD7030 utilize the KC7020 frequency controller. The KC7020 utilizes an acceleration sensor in the drive to determine the optimum operating frequency for ease of operation. The LCD screen allows the operator to turn the machine on and off, and to chose the necessary conveying speed to operate with the press. The KC7070 remote operation feature allows for connection and operation through the press controls if so equipped.
Utility Connection Ports
All Krämer dedusters feature a 2 inch Tri-Clamp vacuum dust collection port for ease of assembly of a dust collection hose. The height adjustment of the KD7010 and KD7030 dedusters are enclosed in the drive base housing along with all wiring for a clean arrangement. The base contains a lockable gas strut which allows easy vertical adjustment of the deduster to meet the press outlet height. All wiring is enclosed in the base for an uncluttered look and ease of cleaning. In addition, the power supply cable uses a quick connect plug. The quick connect plug allows for use of preassembled cables for power supply as well as signal wire options.
Dust tight seal membrane
The KD7010 and KD7030 deduster drives are protected from dust by a silicone membrane held down with a bolt down flange seal. The seal membrane protects all of the drive mechanical and electrical components from dust intrusion allowing for long trouble free operation and ease of maintenance.
Containment and ATEX Performance
The KD7010 and KD7030 dedusters have been independently tested and certified to meet OEB 3 and OEB 4 containment levels in accordance with ISPE – SMEPAC requirements as well as the EC Machinery Directive 2006/42/EC and Directive 94/9/EC (ATEX-95).
Specifications
Power Supply
110-240 V, 50/60 Hz
Peak current
3 A
Noise emission (1 m)
< 68 dB(A)
Elevation height
400-800-1200-1600 mm
Outlet height
1165-2560 mm
Inlet height adjustable
Inlet height
725-910 mm
Total height
1155-2800 mm
Conveying technology
Upward conveying spiral
Drive unit technology
Pat. counter weight
Footprint
590-500 mm
Product contacting parts
AISI 316L, silicone, PET-G, PUR
Weight
67-110 kg
Compressed air
Ø6/4mm, 50-100 l/min (p=1.5-2 bar)
Air extraction
2" tri-clamp, 100-250m3/h (p=10-20 mbar)
Product inlet
ISO DN 65 tri-clamp
Product outlet
ISO DIN 65 tri-clamp
Protection rating drive unit
IP54
Protection rating housing/controller
IP50
Controller
Backlit LCD Screen with touchpad
Processing of tablets (var. forms ) Ø3-35 mm
Processing of mini/micro-tablets Ø1.5-3 mm
Processing of effervescent tablets Ø25-35 mm
Processing of capsules Nr. 4-00
Conveying speed tablet Ø5 mm
6'300'000 tabs/h
Conveying speed tablet Ø13 mm
574'000 tabs/h
Conveying speed tablet Ø20 mm
240'000 tabs/h
Conveying speed tablet Ø25 mm
95'000 tabs/h
Conveying speed tablet Oblong 16.3 x 7.6 x 5.7 mm
770'000 tabs/h
Explosion protection ATEX 94/9/EG
II 2D/- Db 140 °C
OEL Level acc. SMEPAC
OEB 3-4
cGMP compliance
CE compliance
Option sample collection
Option helix coating
Option inlet adapter
Option outlet adapter
Option air extraction adapter
Option mini/micro-tablets
Option metal detector test tablet insert device KT2010
Option WIP manual/auto
Option 4 way drain valve system (drain/air exctraction/return)
Option hepa filter
Option empty capsule sorter KCS10
Option jam sensors
Option 2-way diverter manual KV2010 DT/WIP
Option 2-way diverter auto KV2020 DT/WIP
Option 2-12-way diverter auto V40000-V5000 DT/WIP
Option filling level sensors
Option air extraction monitoring
Option validation documentation
Option material certificates
