Our bestseller for all applications
KD6015
Tablet deduster with our unique acceleration control combined with a metal detector by Ceia, Lock or Safeline. Reasonable alternative to the high-end dedusters featuring reduced user functionalities.
- Upward conveying heights 250 to 750 mm
- Improved dedusting and deburring capabilities thanks to optimized combination of vibration, dust agitation, air and vacuum suction
- Featuring an acceleration sensor that assures constant vibration, independent of the load / amount of tablets in the deduster
- Very high conveying capacity
- Optimum viewing of tablet movement with removable window
- Easy height adjustment, full 360° freedom of rotation at tablet inlet
- Vibration-free housing, patented drive unit
- Compact design, minimum footprint
- Easy assembly and disassembly, no tools are needed
- Easy to clean
Conveying height
250-750mm
Available Metal Detectors
Ceia, Lock, Safeline
C820 Frequency controller
The KD60 Series utilize the C820 frequency controller. The C820 operates with an acceleration sensor in the drive to determine the optimum operating frequency for ease of operation and assures constant vibration, independent of the load or amount of tablets. The LCD screen allows the operator to turn the machine on and off, and to chose the necessary conveying speed to operate with the tablet press. The C820 remote operation feature allows for connection and operation through the tablet press controls if so equipped.
KRÄMER PATENTED VIBRATORY DRIVE SYSTEM
The KD60 Series vibratory drive features the Krämer patented counterweight system which allows for operation of the deduster with no vibration being transmitted to up stream or down stream equipment. Because of the counterweight the machine is extremely quiet, low maintenance and allows for precise vibration control which is extremely gentle on the tablets. The silicone membrane prevents dust from entering the vibratory drive unit.
TABLET INLET OPTIONS
The optional tablet inlet adapter connection to the tablet press and upstream equipment with the use of a rectangular tablet inlet 110×70 mm. If the adapter is not being used, a hose can directly be attached to the round Ø 60 mm inlet. The inlet can be rotated 360° independent of the outlet. The deduster is easily adjustable to various tablet press discharge configurations.
Utility Connection Ports
All Krämer dedusters feature a 2 inch Tri-Clamp vacuum dust collection port for ease of assembly of a dust collection hose. Various optional hose adaptors are available upon request. In addition, the power supply cable uses a quick connect plug. The quick connect plug allows for use of preassembled cables with power supply as well as signal wire options for communication to upstream equipment such as tablet presses.
Optimal Process Viewing
The KD60 Series features a PETG lift off window for optimal process viewing and ease of access to the helix for easy removal for cleaning. In addition, dust agitation compressed air nozzles are supplied for the cleanest tablets possible.
Ease of assembly and Disassembly
No tools are needed to assemble or disassemble the machine for cleaning. All product contact surfaces are 316L stainless steel. All Krämer machines minimize the number of parts to be cleaned, and keep the weight of each part minimal for ease of handling.
Specifications
Power Supply
110-240 V, 50/60 Hz
Peak current
3 A
Noise emission (1 m)
< 68 dB(A)
Elevation height
250-500-750 mm
Outlet height
670-1390 mm
Inlet height adjustable
Inlet height
715-965 mm
Total height
1180-1920 mm
Conveying technology
Upward conveying spiral
Drive unit technology
Pat. counter weight
Footprint
915x550 mm
Product contacting parts
AISI 316L, silicone, PET-G, PUR
Weight
125-145 kg
Compressed air
Ø6/4 mm, 50-100 l/min (p=1.5-2 bar)
Air extraction
2" tri-clamp, 100-250m3/h (p=10-20 mbar)
Product inlet
Ø 60.3 mm
Product outlet
Ø 60 mm
Protection rating drive unit
IP54
Protection rating housing/controller
IP50
Controller
Backlit LCD Screen with touchpad
Metaldetector models
Ceia THS/PH21 EE , Lock PH IQ4 , Safeline Tablex 2S
Metaldetector sensitivities
Ceia SS316L=0.50 / FE=0.30 / N-FE=0.35 , Lock SS316L=0.50 / FE=0.30 / N-FE=0.35 , Safeline SS316L=0.50 / FE=0.30 / N-FE=0.40
Processing of tablets (var. forms ) Ø3-35 mm
Processing of mini/micro-tablets Ø1.5-3 mm
Processing of effervescent tablets Ø25-35 mm
Processing of capsules Nr. 4-00
Conveying speed tablet Ø5 mm
3'500'000 tabs/h
Conveying speed tablet Ø13 mm
410'000 tabs/h
Conveying speed tablet Ø20 mm
130'000 tabs/h
Conveying speed tablet Ø25 mm
68'000 tabs/h
Conveying speed tablet Oblong 16.3 x 7.6 x 5.7 mm
425'000 tabs/h
Explosion protection ATEX 94/9/EG
N/A
OEL Level acc. SMEPAC
N/A
cGMP compliance
CE compliance
Option sample collection
Option helix coating
Option inlet adapter
Option outlet adapter
Option air extraction adapter
Option mini/micro-tablets
Option metal detector test tablet insert device KT2010
Option WIP manual/auto
Option 4 way drain valve system (drain/air exctraction/return)
Option hepa filter
Option empty capsule sorter KCS10
Option jam sensors
Option 2-way diverter manual KV2010 DT/WIP
Option 2-way diverter auto KV2020 DT/WIP
Option 2-12-way diverter auto V40000-V5000 DT/WIP
Option filling level sensors
Option air extraction monitoring
Option validation documentation
Option material certificates
