Capsule handling at a high level
KCP15
The Krämer capsule polisher will elevate, polish and dedust any size of capsule. The rotational spiral brush designed specifically for capsule applications polishes gently and removes excess dust. The perforated housing allows ideal removal of the dust. The device outlet can be fitted with peripherals such as metal detectors, empty capule sorters and diverters.
- Upward conveying range of 800 to 2000 mm
- Dust-tight Tri-Clamp connections
- Available with Ceia, Lock and Safeline metal detectors
- Quiet operation < 68 dB
- Speed continuously adjustable
- Optimal cleaning of capsules with gentle conveying
- Compact design, minimum footprint
- Modular structure (400 mm)
- Easy assembly and disassembly, no tools are needed
- Easy to clean
- Classification: Atex Zone II 2D/- Db 140 °C
Conveying height
800-2000 mm
Available Metall Detectors
Ceia, Lock, Safeline
Easy to use control panel
The KCP10 and KCP15 utilize a simple frequency controller that allows for continuously adjusting the conveying speed. In addition, the power supply cable uses a quick connect plug. The quick connect plug allows for use of preassembled cables with power supply as well as signal wire options for communication to upstream equipment such as capsule fillers.
Brush design – an innovative Approach
The rotational spiral brush designed specifically for capsule applications polishes gently and removes excess dust. With our unique stepless design between brush modules, we do minimize product jam and guarantee continuous product conveying. Every single brush module can be marked accordingly in order to keep track of dedicated products.
Krämer DESIGN and drive system
The KCP Series drive features a state of the art geared motor with a special designed shaft seal that prevents dust from entering the drive unit. The special cGMP design allows for easy cleaning and maintenance. Regardless of our conveying height, this unit provides the most economical way of upwards conveying on a minimal footprint, thanks to its compact design as a stand alone or combined unit with metal detector.
Connection ports
With the use of optional inlet adapters, the capsule polisher is easily adjustable to various capsule filler discharge configurations. If an adapter is not being used, a hose can directly be attached to the Tri-Clamp inlet. The inlet can be rotated 360° independent of the outlet. All Krämer capsule polisher feature a 2 inch Tri-Clamp vacuum dust collection port for ease of assembly of a dust collection hose. Various optional hose adaptors are available upon request. The perforated housing allows ideal aspiration of the dust on each module independently.
Ease of assembly and Disassembly
No tools are needed to assemble or disassemble the machine for cleaning. All product contact surfaces are AISI 316L stainless steel. All Krämer machines minimize the number of parts to be cleaned, and keep the weight of each part minimal for ease of handling. This assures quick and effortless cleaning processes.
Containment and ATEX Performance
The KCP10 and KCP15 capsule polishers have been independently tested and certified to meet OEB 3 and OEB 4 containment levels in accordance with ISPE – SMEPAC requirements as well as the EC Machinery Directive 2006/42/EC and Directive 94/9/EC (ATEX-95).
Specifications
Power Supply
110 V, 50/60 Hz - 230V, 50/60 Hz
Peak current
4-2 A
Noise emission (1 m)
< 68 dB(A)
Elevation height
800-1200-1600-2000 mm
Outlet height
930-2130 mm
Inlet height adjustable
Inlet height
503 mm
Total height
1465-2665 mm
Conveying technology
Upward conveying brush
Drive unit technology
Gear motor
Footprint
932-545mm
Product contacting parts
AISI 316L, stylon, PET-G, PUR
Weight
105-150 kg
Compressed air
Ø6/4mm, 50-100 l/min (p=1.5-2 bar)
Air extraction
2" tri-clamp, 100-250m3/h (p=10-20 mbar)
Product inlet
2" tri-clamp
Product outlet
Ø 66 mm
Protection rating drive unit
IP54
Protection rating housing/controller
IP50
Controller
Control with potentiometer
Metaldetector models
Ceia THS/PH21 EE , Lock PH IQ4 , Safeline Tablex 2S
Metaldetector sensitivities
Ceia SS316L=0.50 / FE=0.30 / N-FE=0.35 , Lock SS316L=0.50 / FE=0.30 / N-FE=0.35 , Safeline SS316L=0.50 / FE=0.30 / N-FE=0.40
Processing of tablets (var. forms ) Ø3-35 mm
Processing of mini/micro-tablets Ø1.5-3 mm
Processing of effervescent tablets Ø25-35 mm
Processing of capsules Nr. 4-00
Conveying speed capsule size Nr. 4
300'000 caps/h
Conveying speed capsule size Nr. 3
300'000 caps/h
Conveying speed capsule size Nr. 2
300'000 caps/h
Conveying speed capsule size Nr. 1
300'000 caps/h
Conveying speed capsule size Nr. 0
300'000 caps/h
Conveying speed capsule size Nr. 00
250'000 caps/h
Explosion protection ATEX 94/9/EG
II 2D/- Db 140 °C
OEL Level acc. SMEPAC
OEB 3-4
cGMP compliance
CE compliance
Option sample collection
Option inlet adapter
Option outlet adapter
Option air extraction adapter
Option metal detector test tablet insert device KT2010
Option WIP manual/auto
Option 4 way drain valve system (drain/air exctraction/return)
Option hepa filter
Option empty capsule sorter KCS10
Option jam sensors
Option 2-way diverter manual KV2010 DT/WIP
Option 2-way diverter auto KV2020 DT/WIP
Option 2-12-way diverter auto V40000-V5000 DT/WIP
Option filling level sensors
Option air extraction monitoring
Option validation documentation
Option material certificates
